Introduction: A New Era of Firefighting Foams
The fire protection industry is undergoing a major transformation. With growing concerns about the environmental and health impacts of PFAS-based foams, regulators and industries worldwide are demanding safer, greener alternatives. At FIRECHEM, we have been at the forefront of this change. Our Fluorine Free Foam (F3) range has been engineered to provide the same reliable fire suppression performance as traditional foams without compromising on environmental responsibility. These foams are:
- Completely free of fluorine and PFAS/PFOA compounds
- Biodegradable and environmentally sustainable
- Certified to UL standards for international acceptance
- Proven effective in a wide range of fire scenarios, from hydrocarbons to polar solvents
By choosing FIRECHEM Fluorine Free Foams, you are not just investing in safety—you are investing in the future of sustainable fire protection.
Why Fluorine-Free Matters
Traditional firefighting foams containing PFAS and PFOA are persistent in the environment, bio-accumulative, and linked to health risks. Many regions—including Europe, the U.S., and the Middle East—are phasing out these foams. FIRECHEM Fluorine Free Foams are designed to:
- ✅ Meet global environmental regulations
- ✅ Eliminate PFAS-related risks
- ✅ Offer safe training and operational use
- ✅ Protect both people and the planet
When you choose FIRECHEM F3 foams, you ensure regulatory compliance, long-term safety, and reduced environmental liability Now explore FIRECHEM’s full range of Fluorine-Free products built for performance, safety, and sustainability.
FireChem Synthetic Fluorine Free Foam (SFFF) 3%
FIRECHEM Fluorine Free Synthetic Foam (SFFF) 3% is a high-performance, fluorine-free firefighting foam concentrate formulated for Class B hydrocarbon fuel fires. When used at 3% concentration, it provides rapid flame knockdown, excellent burn-back resistance, and stable foam coverage. It is effective with fresh and sea water. FIRECHEM Fluorine Free Synthetic Foam (SFFF) 3% is an environmentally responsible foam that forms a cohesive blanket over fuel surfaces, cutting off oxygen and suppressing flammable vapors. Its cooling effect aids in rapid fire suppression, making FIRECHEM SFFF 3% suitable for both fixed and mobile applications.
Key Features & Advantages of SFFF 3%:
- 100% Fluorine-Free and biodegradable.
- Excellent burn-back resistance and fire control performance.
- Compatible with fresh & sea water.
- UL Listed as a FIRECHEM Fluorine Free Synthetic 3%, at substantially lower usage rates than most Synthetic Foams.
- Suitable for both mobile and fixed installations.
- Can be applied using low, medium, or high expansion systems.
- Stable premix for over 30 days when mixed with potable water, which is significantly longer than traditional Class A foam solutions.
- No PFAS, PFOA, or fluorinated surfactants.
- Exhibits excellent foamability, even in cold water conditions.
- Good compatibility with Class A/B Systems and Dry Powder ABC.
Technical Specifications of SFFF 3%:
| Product | Fluorine Free Synthetic 3% (SFFF 3%) |
| Use Concentration | 3% |
| Specific Gravity @ 20°C | 1.02 ± 0.02 |
| pH | 7.5 ± 1.0 |
| Viscosity @ 20°C (LV-4 Spindle @ 100 RPM) | 1800 ± 500 mPas |
| Foam Drainage | 10 minutes minimum |
| Storage Temperature | 1.7°C – 49°C |
| Foam Expansion | Low >8 |
| Freezing Point | -5°C |
| Suspended Sediment | < 0.25% |
Areas of Application of SFFF 3%:
FIRECHEM Fluorine Free Synthetic 3% Foam will provide quality protection for a wide range of hazardous areas such as :
- Forestry
- Mining
- Industrial fire
- Tires Industry
- Hydrocarbon Spill Control
- Polymer manufacturing
- Domestic fire
- Mobile equipment
Storage & Handling of SFFF 3%:
The recommended storage temperature range for FIRECHEM Fluorine Free Synthetic (SFFF) 3% is 35°F (1.7°C) to 120°F (49°C). Fluorine Free Synthetic 3% is not affected by freeze/thaw cycles, and it has unique premix stability properties. Samples of FIRECHEM Fluorine Free Synthetic 3%, premixed with potable municipal water supplies, have been shown to be stable and not suffer any significant loss of expansion or drainage properties after 30 days. Actual results may vary based on the water supply. Fluorine Free Synthetic 3% should be stored in its original shipping container or in tanks or other containers that have been designed for such foam storage. Recommended construction materials are stainless steel (Type 304L or 316), high-density cross-linked polyethylene, or reinforced fiberglass polyester (isophthalic polyester resin) with a vinyl ester resin internal layer coating (50 – 100 mils). Shelf life is expected to be 10 years or more when stored at the recommended temperature.
Packaging Options:
- 20–30 L Jerrycans
- 200 L Drums
- 1000 L IBC totes
Hardware Compatibility:
- Fixed proportioning systems
- Foam chambers, sprinklers & monitors
- Mobile trailers & skids
- Foam pourers, nozzles, and proportioning systems
FireChem Alcohol Resistant Synthetic Fluorine Free Foam (AR-SFFF) 3×3%
FireChem Fluorine Free AR Synthetic 3%/3% is a certified fluorine free Class A/B firefighting synthetic foam, Alcohol-resistant foam concentrate used to effectively extinguish Class B hydrocarbon & polar solvent fuel fires at 3% solution. It provide rapid extinguishment and excellent burn back characteristics can be used with fresh and salt water. FireChem Fluorine Free AR Synthetic 3%/3% create foam blanket above the fuel on fire and add a cooling effect to rapidly extinguish the fire. It is environmentally friendly foams can be applied in low, medium and high expansion. They offer excellent extinguishment performances and burn back resistance.
Key Features & Advantages of AR-SFFF 3%/3%:
- Environmentally responsible foam concentrate.
- Can be used with fresh, brackish and sea water.
- Contains NO alcohols for higher flash point
- Compatibility with Class A/B/C Systems.
- Compatibility with dry powder ABC
- Exhibits good foamability, even in cold water.
- UL Listed as a FireChem Fluorine Free AR Synthetic 3%/3%, at substantially lower usage rates than most AR Synthetic.
- Premix is stable for more than 30 days (using potable water), which is significantly longer than traditional Class A foam solutions.
Technical Specifications of AR-SFFF 3%:
| Product | Fluorine Free AR Synthetic 3%/3% (AR-SFFF 3%/3%) |
| Use Concentration | 3%x3% |
| Specific Gravity @ 20°C | 1.02 ± 0.02 |
| pH | 7.5 ± 0.5 |
| Viscosity @ 20°C (LV-1 Spindle @ 60 RPM) | 1500 ± 500 CST Max. |
| Refractive Index | 10 minutes minimum |
| Min. Storage Temperature | 1.7°C |
| Max. Storage Temperature | 49°C |
| Freezing Point | 0°C |
| Appearance | Amber Colour |
Areas of Application of AR-SFFF 3%:
FIRECHEM Fluorine Free Synthetic 3% Foam will provide quality protection for a wide range of hazardous areas such as :
- Forestry
- Mining
- Industrial fire
- Tires Industry
- Hydrocarbon Spill Control
- Solvent Extraction
- Polymer manufacturing
- Domestic fire
- Mobile equipment
Storage & Handling of AR-SFFF 3%:
The recommended storage temperature range for FireChem Fluorine Free AR Synthetic 3%/3 is 35°F (1.7°C) to 120°F (49°C). Fluorine Free AR Synthetic 3%/3% is not affected by freeze/thaw cycles, and it has unique premix stability properties. Samples of FireChem Fluorine Free AR Synthetic 3%/3%, premixed with potable municipal water supplies, have been shown to be stable and not suffer any significant loss of expansion or drainage properties after 30 days. Actual results may vary based on the water supply. Fluorine Free AR Synthetic 3%/3% should be stored in its original shipping container or in tanks or other containers that have been designed for such foam storage. Recommended construction materials are stainless steel (Type 304L or 316), high-density cross-linked polyethylene, or reinforced fiberglass polyester (isophthalic polyester resin) with a vinyl ester resin internal layer coating (50 -100 mils). Shelf life is expected to be 10 years or more when stored at recommended temperature.
Packaging Options:
- 20–30 L Jerrycans
- 200 L Drums
- 1000 L IBC totes
Hardware Compatibility:
- Fixed proportioning systems
- Foam chambers, sprinklers & monitors
- Mobile trailers & skids
- Foam pourers, nozzles, and proportioning systems
Environmental Impact & Compliance of FIRECHEM F3 Foams:
- 🌍 100% PFAS-Free: No fluorinated surfactants or harmful organics
- ♻️ Biodegradable: Breaks down naturally without contaminating soil or water
- 📜 Certifications: UL approvals for global reliability
- ✅ Effluent-Friendly: Compatible with wastewater treatment systems
By choosing FIRECHEM’s F3 foams, you are adopting solutions that align with global ESG goals and regulatory frameworks.
Get in Touch with Us
Choose sustainability without compromise in fire safety. 📩 Request catalogues, datasheets, or technical consultations today. Contact us today!